Leg Levelers

Leg Levelers

HEAVY DUTY LEG LEVELERS

Are the best, most cost effective way to manufacture and install cabinets.

1.   The top piece of the leg leveler is available with a 20mm dowel, or no dowel.  all screw holes accept a #6 5/8” flat head screw. (Same as European hinges)

2.   There is a locating pin to align the standard 4 1/4” high toe.

3.   The toe kick is attached to a clip-on, removable plate, and it is supported by the top and bottom edges of the leveler.

      The toe kick can be attached to the plate with two screws or with a spline.

      Clip-on, removable toe board gives permanent access under cabinets to electrical and plumbing installations and for cleaning.

4.   Cabinet leveling is quick and simple through a hole in the base board or by turning base of leg.  The hole in the base board is covered with a cap.

5.   Cabinet adjusts from 3 7/8” to 7 1/2” from the floor with leg leveler and optional extension.

      Cabinet rests on leg leveler preventing water damage.

6.   The heavy duty leg leveler simultaneously supports the cabinet and end panel, freeing up stress on dowels and joints.

Production Leg Levelers
Production Leg Levelers
Big Foot Leg Levelers
Big Foot Leg Levelers
Metal Leg Levelers
Metal Leg Levelers